Toggle Nav

Reach Us

  • Menu
  • Setting

Face Recognition Terminal

In stock

Wall mounting and base mounting
5-inch LCD touch screen to display operation interface, etc. 0.3 MP wide-angle lens
Face recognition distance: 0.3 m to 1 m
High performance processor with deep learning algorithm
Max. 1000 face pictures storage
Multiple authentication modes: authentication by comparing face picture, by swiping card and comparing face picture, by custom mode, etc.
Applies face picture data and card data to the device via TCP/IP or uploading them to the device via the USB flash drive
Stand-alone operation
Transmits and saves the comparing results and the captured face pictures to the client software or others
Supports TCP/IP, Wi-Fi , and EHome public network communication
Connects to external access controller or card reader via Wiegand communication
Connects to secure door control unit via RS-485 communication to avoid the door opening when the terminal is destroyed
Watchdog design for protecting the device and ensuring device running properly
Voice prompt

* Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.

Face Recognition Terminal
System Parameters
Card Reading Frequency: 13.56MHz
Indicator: Dual-color LED Indicator
1:N Face Recognition Duration: ≤ 1 s/Person
Operation System: Linux
Card Reading Distance: 1 ~ 5cm
Card Capacity: 1000
Face Recognition Accuracy Rate: ≥ 99%
Card Type: EM Card (IPC7K8105E)
Mifare Card (IPC7K8105M)
Camera: 0.3 MP Wide-Angle
Event Capacity: 50000
Face Recognition Distance: 0.3 m to 1 m
Face Capacity: 1000
Device Interfaces
Communication Mode: Ethernet 10/100Mbps Self-adaptive; Wi-Fi
Output Interface: Doorbell × 1, Lock × 1, Alarm Output × 1
Input Interface: RS-485 × 1, Wiegand × 1, Door Magnetic Sensor × 1, Exit Button × 1, Tamper × 1, Alarm Input × 2
USB Interface: USB2.0
LCD Screen: 5-inch LCD Touch Screen; Resolution: 800 × 480
Lithium Battery: Not Support
Power Supply: 12 VDC/2 A
Installation: Base Mounting; Wall Mounting
Application Situation: Indoor
Working Humidity: 10% to 90% (Non-Condensing)
Working Temperature : -10°C to +50°C (14°F to +122°F)
Dimensions (L×W×H): 190mm × 157mm × 98mm (7.48” × 3.86” × 6.18") 
Product Inquiry